It is necessary for the font on dry adhesive printing to be more than 3mm away from the cutting edge to prevent it from being cut when cutting.

According to CMYK to demand printing color, it is necessary for customers to refer to the percentage of CMYK chromatogram to make color filling.

When the same document is printed in different times, the color will be different, and the color difference within 10% is normal (because the ink amount control will be different each time)

In the self-adhesive printing, the color matching of color block should try to avoid the combination of dark color or full color, otherwise it will be easy to cut and produce back printing after printing.

The color of the self-adhesive shading or underlay should not be less than 10% to prevent it from appearing when printing the finished product.

Self adhesive all input or self drawn graphics, the wireframe thickness should not be less than 0.1 mm, otherwise the print will form a broken line or unable to appear.

When a gradient object is inserted into a frame for accurate clipping, please convert it into a dot matrix. Because the gradient of the inserted frame is rotated after it is grouped with other objects, the gradient direction will not rotate together. In addition, it is not allowed to set the "margin width" for any gradients. Due to the different explanations of the output machine, sometimes the gradients are not filled enough.

Please mark the fold line, front and back when printing with double-sided double fold hand prick.

No matter how many people there are, no matter how many cards there are, no matter how many cards there are, no matter how many people there are, they should be placed on the same page.

At the end of the manuscript, there is no need to draw cross lines and cut tangent lines. Two invisible wire frames can be used to make the size and bleeding line of 92x56mm and 90x54mm after cutting. If you have any special requirements, please specify them in the order and the uploaded documents.

Pay special attention to any image, color block or line beyond the manufacturing scale, please put it in the frame. Don't use white color block to avoid confusion when forming a combined version.

When printing the self-adhesive label, we must remember the above contents well. Only when we master some requirements of printing, can we make our self-adhesive label print better.

Other related introduction

A brand full of history. The arc-shaped bottle body design, even a corner of the bottle body label also deliberately adds the round feeling of the arc. After careful observation, you can see that the map of origin is pressed on the label, which fully connects the product with the region. In the limited time bidding mode, the printing factory that publishes the demand can receive 5 quotations within half an hour. The quotation details will show the advantages and characteristics of each tripartite printing factory. The printing factory can choose the best from the best and choose the tripartite printing factory with the highest cost performance to produce, so as to reduce the selection cost and printing cost in the outsourcing process.